High-Pressure Water Jetting Machines → Drain Cleaning Machines
Professional high-pressure drain cleaning machines remove grease, sludge, sand and deposits from wastewater and sewer pipes.
Drain Cleaning Machines
Model: S-JBS250
JBS S-JBS250 is a professional drain jetter delivering adjustable 30–250 bar pressure, 15 L/min flow, a 13.5 HP drive, Italian triplex ceramic-plunger pump and bearing-mounted hose reel. It is designed for drainage contractors, facilities and wastewater maintenance teams clearing grease, sludge, sand, sediment and organic deposits from suitable commercial drain and sewer lines efficiently.
Drain Cleaning Machines
Model: BS-JBS200
JBS BS-JBS200 is a commercial petrol pressure washer combining adjustable 30–200 bar pressure, 15 L/min flow, a 13.5 HP petrol engine and an Italian triplex ceramic-plunger pump. Built for construction, agriculture, fleet yards and mobile contractors, it delivers cold-water cleaning where mains electricity is unavailable and equipment must be washed near the job site.
Category Guide
Drain cleaning machines are professional systems that use high-pressure water to help break up and remove grease, sludge, sand, sediment, and organic waste accumulated in drain, wastewater, and sewer pipes.
The hose reel mechanism allows the long drain-cleaning hose to be unwound neatly, advanced into the pipeline in a controlled manner, and rewound easily after the operation is completed.
These machines can be used by professional plumbers, drain-cleaning companies, municipalities, factories, restaurants, hotels, hospitals, and facility-management companies.
The S-JBS250 Hose Reel Drain Cleaning Machine offers adjustable operating features for different pipelines and types of blockages.
Its main technical features include:
Adjustable working pressure from 30 to 250 bar
Adjustable water flow rate of up to 15 liters per minute
13.5 HP motor
Original Italian pump with three ceramic pistons
Bearing-supported hose reel system
Different hose-length and nozzle options
Residual-current device and thermal motor protection
The machine should not be selected solely according to its maximum pressure. Water flow rate, hose diameter, hose length, nozzle design, and the characteristics of the pipe to be cleaned should be evaluated together.
High-pressure water generated by the pump is delivered to the nozzle inside the pipe through a special drain-cleaning hose. Rear-facing water jets help move the hose forward through the pipeline.
Forward- and side-facing jets break up the blockage and carry loosened deposits back through the pipe.
Operation should begin at low pressure. The pressure should be increased gradually after checking the condition of the pipe. Maximum pressure should not be applied directly to old, cracked, or weakened pipe connections.
| Application | Deposits that can be removed |
|---|---|
| Residential and apartment drains | Grease, soap, hair, sediment, and organic waste |
| Restaurant and kitchen drains | Oil and grease deposits |
| Sewer and wastewater lines | Sludge, sand, sediment, and organic waste |
| Manhole connections | Sludge, sand, and solid deposits |
| Factory and industrial drains | Suitable oily and solid deposits |
| Stormwater and drainage lines | Soil, sand, sludge, and leaf deposits |
Collapsed pipes, hard foreign objects, solidified deposits, or severe root intrusion may not be removable with a standard nozzle. These applications may require a pipe inspection camera, a special cutting head, or additional mechanical equipment.
Drain cleaning machine prices vary according to working pressure, water flow rate, pump and motor specifications, hose length, hose diameter, nozzle options, and included standard equipment.
For an accurate quotation, the pipe diameter, pipeline length, type of blockage, and required daily operating time should be determined.
To compare other high-pressure systems, explore Pressure Washing Machines.
A professional drain jetter or sewer jetting machine should be specified around the pipework rather than pressure alone. Pipe diameter, line length, bends, blockage type, hose size, nozzle configuration and expected daily operating hours all affect real cleaning performance.
Pressure helps break through deposits, but water flow carries loosened grease, sludge, sand and sediment out of the line. This is why professional jetter manufacturers typically evaluate pressure and flow together with pipe diameter and hose capacity when recommending equipment.
The JBS S-JBS250 Hose Reel Drain Cleaning Machine provides adjustable 30–250 bar pressure, up to 15 L/min flow, a 13.5 HP drive and an Italian triplex ceramic-plunger pump. Its bearing-supported hose reel is designed to simplify hose deployment and recovery on professional drainage jobs.
Before purchasing, identify the minimum and maximum pipe diameters you normally service. Hose diameter and length should then be matched to those lines. Smaller internal drains may require a different hose and nozzle setup from commercial wastewater or longer sewer runs.
Nozzle selection matters equally. Rear-facing jets help propel the hose through the pipe and flush deposits backwards, while forward or side jets attack the obstruction and clean the pipe wall. Severe root intrusion, collapsed pipework or solid foreign objects may require inspection equipment or mechanical cutting tools rather than standard jetting alone.
Explore the complete JBS Drain Cleaning Machines range. For a broader understanding of pressure, flow and industrial water-jet applications, see Where Are High-Pressure Water Jets Used?.
Send JBS your pipe diameter, line length, blockage type and expected workload to request a drain-jetting quotation.
A hose-reel sewer jetting machine is a professional cleaning machine that clears blockages in drains, wastewater pipes, and sewer lines using high-pressure water. The hose reel allows the long sewer-cleaning hose to be used neatly and wound back easily.
High-pressure water generated by the pump is sent to the sewer-cleaning nozzle at the end of the hose. Rear-facing water jets pull the hose into the pipe, while jets directed forward and around the nozzle break up the blockage and clean deposits from the pipe surface.
The required pressure depends on pipe diameter, line condition, and the type of blockage. Machines in the 150–250 bar range may be used for professional drain and sewer cleaning. However, water flow rate, hose diameter, and nozzle design should be considered together with pressure when evaluating performance.
Suitable pipe diameter cannot be determined from machine pressure alone. Hose diameter, nozzle size, water flow rate, the number of bends in the line, and the nature of the blockage must be evaluated together. Before purchase, the minimum and maximum pipe diameters to be cleaned should be provided to the manufacturer.
It can be used by professional plumbers, drain-cleaning companies, municipalities, factories, restaurants, hotels, hospitals, property-management companies, and industrial facilities. Machine capacity should be selected according to daily operating time and the type of sewer or drain lines to be cleaned.
Prices vary according to working pressure, water flow rate, motor power, pump brand, hose length, hose diameter, nozzle options, electric or fuel-powered engine choice, and standard equipment. When comparing machines, spare-parts availability and technical service should be considered in addition to the bar rating.
Tell us the pipe diameter, pipeline length and type of blockage. We will identify the most suitable machine, hose and nozzle options for your application and prepare a customised quotation.
Request a QuoteRequest a Quote
Tell us what you need and our sales team will recommend the right model, capacity and equipment for your application.