Recycling facilities need controlled cleaning around sorting areas, equipment housings and service floors. JBS Makina offers pressure washers and floor cleaning machines for suitable surfaces. Match equipment to contamination, drainage and operating schedules before requesting quotations.
Materials recovery facilities handle mixed packaging streams, with conveyors, balers and tipping bays. Loose film, cardboard fragments, dust and occasional hydraulic leaks create cleaning needs that cannot be solved with one washing method.
When debris accumulates near access panels, maintenance inspections become harder and work areas can become less predictable.
Site managers should establish separate routines for housekeeping, planned shutdown cleaning and external equipment washing.
A contractor tender should specify the surfaces covered, expected service windows and waste collection responsibilities rather than simply asking for a high-pressure machine.
Dry removal comes before washing in most sorting areas. Loose packaging should be collected without driving it into motors or drainage points.
Conveyors, bearings, optical sorters, power cabinets and sensor assemblies must not be treated as pressure-washable surfaces. Equipment should be shut down and isolated according to the operator's maintenance procedure before cleaning.
Fine combustible dust or hazardous residues may require specially rated collection equipment; an ordinary wet-and-dry vacuum is not automatically suitable.
Wet cleaning should only proceed on surfaces approved by the equipment manufacturer and after nearby electrical components have been protected. This limits disruption.
For robust outdoor handling equipment, hardstanding and approved metal housings, an adjustable cold-water pressure washer may be appropriate.
The JBS JSK-250 offers a published 20–250 bar adjustment range and nominal 15 L/min flow, with surface-specific working settings.
Where machinery maintenance involves oily contamination on heat-compatible metal, the JSC-250 adds a heated-water option.
Neither machine should be positioned as a complete conveyor or shredder cleaning system.
On level, suitable indoor floors, a scrubber dryer such as the JŞ-40 or larger JŞ-300 may support routine floorcare with dirty-water recovery, provided debris is removed first.
Waste treatment installations face particular responsibilities for contaminated run-off. Depending on the materials processed, washing water can contain suspended solids, oils, organic residues or metals.
The operator should keep cleaner surface water separate from contaminated streams and assess drainage, pretreatment and discharge permits before introducing wet cleaning.
EU Waste Treatment BAT conclusions under Decision 2018/1147 include BAT 19, addressing water efficiency, segregation of water streams and drainage for installations within their defined scope.
They do not certify cleaning machines.
Measured water use, approved chemicals and documented procedures are stronger procurement evidence than unsupported savings claims.
JBS Makina manufactures professional cleaning machines in Türkiye for commercial operators.
Assessment starts with site size, materials, floors and shifts. Explore the JBS professional cleaning equipment range alongside suitable pressure washers before selecting a configuration.
Procurement teams should also establish electrical supply, service intervals, wastewater arrangements and any restricted work zones.
Equip your recycling facility for the actual maintenance workload, not an assumed pressure rating.
Send your site layout, cleaning tasks and available shutdown windows to request a technical specification and commercial quotation from JBS Makina.
Cold Water Car Wash Machines
Model: JSK-250
JBS JSK-250 is a heavy-duty commercial cold water pressure washer combining adjustable 20–250 bar pressure, 15 L/min flow, a 7.5 kW / 10 HP three-phase motor, 380 V / 50 Hz supply and an Italian HAWK pump. It is designed for fleet depots, commercial vehicles, trucks, agricultural machinery, construction equipment and professional cleaning operations.
Hot and Cold Water Car Wash Machines
Model: JSC-250
JBS JSC-250 delivers adjustable 20–250 bar pressure, 15 L/min flow, a 7.5 kW three-phase motor, 380 V / 50 Hz power, an original Italian HAWK pump and hot water up to 60°C. It is designed for commercial vehicles, fleets, workshops, agricultural machinery and heavy equipment where oily, stubborn contamination requires reliable professional hot-water cleaning.
Floor Scrubber Dryers
Model: JE-30
The JBS JE-30 is a compact mains-powered scrubber dryer for shops, offices, hospitality venues and showrooms. Its 350 mm brush and squeegee, 310 W brush motor and 300 W vacuum motor support hard-floor washing and recovery. Separate 5.5 L solution and 6.5 L recovery tanks support routine maintenance in smaller commercial and retail spaces.
