Model: J-C43
JBS J-C43 is a 17-inch single-disc rotary machine built for contract cleaning, carpet shampooing and hard-floor maintenance. Its 1,200 W motor, 165 rpm brush speed, 10 L solution tank and 15 m cable support controlled scrubbing and polishing across commercial premises. The gear-driven design suits hotels, schools, offices and contractors handling varied floorcare tasks.
For UK cleaning contractors, J-C43 is better positioned as a 17-inch single disc rotary machine than as a generic “carpet washing machine”.
The JBS J-C43 combines carpet shampooing with low-speed hard-floor maintenance, making it relevant to contractors managing several surface types across one cleaning portfolio.
The 430 mm working disc places J-C43 in the familiar commercial 17-inch rotary class.
Its 165 rpm brush speed is suited to controlled mechanical cleaning rather than high-speed burnishing.
A 1,200 W motor, 10-litre solution tank and 15-metre cable support work across hotels, schools, offices, religious buildings and other commercial premises.
The rotary brush distributes cleaning solution and agitates the carpet pile.
J-C43 does not recover dirty water.
Where moisture and suspended soil need to be removed after shampooing, operators should follow with a suitable wet vacuum or extraction machine.
This distinction matters when a contractor is comparing a carpet shampoo machine with a spray-extraction cleaner: they carry out different stages of the cleaning process.
Daily contract cleaning places repeated load on the drive system.
J-C43 uses a gear transmission rather than positioning the product purely around motor wattage.
For a commercial buyer, working width, brush speed, machine weight, cable reach, accessory choice and serviceability should all be considered alongside nominal motor power.
With the appropriate brush or pad, J-C43 can move from textile shampooing to compatible hard-floor scrubbing and polishing.
That versatility is relevant where one contractor maintains carpet, tile, terrazzo, marble, concrete or PVC across different client sites.
The surface should always determine the pad, brush and cleaning chemical used.
Review the JBS J-C43, compare the Carpet Cleaning Machines range and see wider applications under Industrial Surface Cleaning. Additional technical content is available in the JBS Blog. Share your floor types, daily area and accessory requirements to request a commercial quotation.
| Model | J-C43 |
|---|---|
| Power | 1200 W |
| Rated Speed | 165 rpm |
| Noise Level | 54 dB |
| Disc Diameter | 43 cm |
| Tank Capacity | 10 L |
| Voltage / Frequency | 220 V / 50 Hz |
| Cable Length | 15 m |
| Transmission System | Gear Drive |
| Weight | 40 kg |
Applications
Recommended Use
This product is suitable for car wash businesses, service centers, fleet cleaning teams and companies seeking efficient professional cleaning equipment.
Customer Experience
There are no approved reviews for this product yet.
Product FAQ
It may be used in certain hard-floor applications if the machine supports a suitable brush or pad system.
Carpet Cleaning Machines
Model: J-CROM
JBS J-CROM is a stainless-steel single-disc machine for commercial carpet shampooing and hard-floor maintenance. Its 1,500 W motor drives a 51 cm brush at 165 rpm, supported by a 10 L solution tank. With suitable pads, operators can scrub or polish compatible floors. Dirty water requires separate extraction after cleaning using a wet vacuum.
Industrial and Car Vacuum Cleaners
Model: JBS-603
The JBS-603 is a high-capacity triple-motor wet and dry vacuum delivering 4,200 W total power, 159 L/s airflow, 2,000 mm H₂O suction and a 70-litre tank for busy car valeting, detailing, workshop and commercial cleaning operations.
Industrial and Car Vacuum Cleaners
Model: JBS-602
The JBS-602 is a twin-motor commercial wet and dry vacuum combining 2,800 W total power, 159 L/s airflow, 2,000 mm H₂O suction and a 70-litre tank for vehicle valeting, detailing bays, garages, workshops and routine commercial cleaning.
Industrial and Car Vacuum Cleaners
Model: F-603
The Fantom F-603 is a triple-motor commercial wet and dry vacuum combining 3,600 W total input, a 60-litre tank, 159 L/s stated airflow and 2,000 mm H₂O suction for vehicle valeting, workshops and demanding commercial cleaning.
