Model: JBS-600
JBS-600 industrial water jetting equipment delivers adjustable 30–600 bar working pressure, 30 L/min water flow and a 45 kW three-phase drive. Its ceramic-plunger pump and Rotopower nozzle support shipyard maintenance, steelwork cleaning and concrete surface preparation, targeting persistent corrosion deposits, loose coatings and hardened industrial residues on suitable heavy-duty substrates under controlled operating conditions.
In the UK industrial market, a 600-bar system is not best described as a larger pressure washer.
The more natural buying language is industrial water jetting equipment: equipment selected around the substrate, deposit, coating, duty cycle, water flow and tooling required for a specific maintenance process.
The JBS-600 combines up to 600 bar with 30 L/min flow for demanding work on steel, concrete, tanks, plant and heavy equipment.
Professional water-jetting manufacturers use the 600-bar class for ship-hull cleaning and surface preparation.
Typical tasks include removing marine growth, corrosion deposits and loose coatings before inspection, maintenance or recoating.
This makes marine water jetting equipment a more commercially relevant positioning for JBS-600 than routine vehicle washing.
For specialist coating removal, the required surface standard should still be confirmed by testing. Pressure alone does not guarantee a particular preparation grade.
Higher jet pressure increases local impact on stubborn contamination.
Flow carries the material released from the substrate away from the working area.
The JBS-600 provides 30 L/min. For comparison, the JBS-500 provides 41 L/min but a lower maximum pressure.
That gives buyers a real process choice rather than simply a larger and smaller machine.
Broad wash-down work, large concrete areas or applications producing substantial loose contamination may benefit from the JBS-500's higher flow.
Where the problem is a more resistant deposit or coating requiring greater local jet impact, the 600 bar water jetting machine may be the better starting point.
A trial area remains the correct way to verify nozzle, pressure and working distance.
For an industrial contractor, the package should include consideration of:
pressure-rated hose and gun;
nozzle configuration;
working hose length;
operator protection;
site exclusion requirements;
water filtration and supply;
electrical connection;
servicing and spare parts.
JBS lists a 45 kW, 380 V three-phase configuration, so site compatibility must be confirmed before installation, particularly for UK projects.
Review the JBS-600 industrial water jetting unit, compare the 500–600 Bar High-Pressure Water Jetting Machines, and explore Industrial Surface Cleaning. Procurement teams can also use the Pressure Washer Maintenance and Lifespan Guide when assessing lifecycle requirements. Send substrate, coating, daily duty and site utilities through the JBS commercial quotation form.
| Model | JBS-600 |
|---|---|
| Pump | 3 ceramic pistons |
| Pump Type | 3 ceramic pistons |
| Working Pressure | 30 – 600 Bar (Adjustable) |
| Flow Rate | 30 L/min (Adjustable) |
| Motor Power | 45 kW / 65 Hp |
| Voltage | 380 V / 3 Phase |
| Pump Safety System | BY-PASS regulator and high-pressure relief limiter |
| Electrical System | SCHNEIDER electrical system (phase protection and 125 A thermal-magnetic circuit breaker) |
| Seal System | Special double-set sealing kit |
| Power Transmission | 450 special drum and geared coupling transmission |
| Body / Cabinet | 2.5 mm side, front and top panels – safety-lock system |
| Standard Equipment | High-pressure hose, wash gun, anti-twist hose system, 5 m power cable and Rotopower nozzle |
Applications
Recommended Use
This product is suitable for car wash businesses, service centers, fleet cleaning teams and companies seeking efficient professional cleaning equipment.
Customer Experience
There are no approved reviews for this product yet.
Product FAQ
A trained operator, suitable personal protective equipment, the correct hose-gun-nozzle set, and a controlled working area are required.
The most common causes include an inadequate water supply, a clogged filter, a clogged or worn nozzle, air trapped in the pump, water leaks, worn seals or gaskets, valve failure, a bypass or regulator problem, or insufficient motor speed.
High-pressure water jet machines are not suitable for standard vehicle bodywork. They should be used in a controlled manner mainly on chassis, heavy equipment, construction machinery, and durable surfaces.
Yes. High-pressure and ultra-high-pressure water jet systems can be used to remove paint, coatings, rust, and other surface contaminants. The required pressure and water flow depend on the coating thickness, surface material, and desired cleaning result. For professional paint removal, the system should be selected specifically for surface preparation applications.
High-Pressure Water Jetting Machines
Model: JBS-500
JBS JBS-500 is a heavy-duty industrial water jetting machine delivering adjustable 30–500 bar pressure, 41 L/min flow, a 45 kW three-phase drive, 380 V supply, Italian triplex ceramic-plunger pump and Rotopower nozzle. It is engineered for surface preparation, shipyards, concrete, tanks, heavy equipment and removal of rust, loose coatings, grease and hardened industrial deposits.
Drain Cleaning Machines
Model: S-JBS250
JBS S-JBS250 is a professional drain jetter delivering adjustable 30–250 bar pressure, 15 L/min flow, a 13.5 HP drive, Italian triplex ceramic-plunger pump and bearing-mounted hose reel. It is designed for drainage contractors, facilities and wastewater maintenance teams clearing grease, sludge, sand, sediment and organic deposits from suitable commercial drain and sewer lines efficiently.
Drain Cleaning Machines
Model: BS-JBS200
JBS BS-JBS200 is a commercial petrol pressure washer combining adjustable 30–200 bar pressure, 15 L/min flow, a 13.5 HP petrol engine and an Italian triplex ceramic-plunger pump. Built for construction, agriculture, fleet yards and mobile contractors, it delivers cold-water cleaning where mains electricity is unavailable and equipment must be washed near the job site.
