Model: SCW-02
JBS SCW-02 is a commercial steam car wash machine built around three working stations. Adjustable 7.5–15 bar steam pressure, 120–170°C temperature, a 20+3 L tank and 380 V / 50 Hz three-phase supply support coordinated interior, wheel and detail cleaning for busy detailing centres, dealerships, workshops and vehicle-preparation operations with multiple technicians working simultaneously.
For a vehicle-preparation business, adding more technicians does not improve throughput if they are waiting to use the same cleaning equipment.
The SCW-02 is therefore best positioned as a three-station steam cleaner for businesses that want several technicians working from one central steam system.
That makes its commercial role different from both a compact single-operator detailer and the four-gun SCW-01.
Dealership preparation departments, rental fleets and detailing centres often divide a vehicle into separate tasks.
One technician may handle interior detailing while others work on wheels, door shuts or other suitable detail areas. A multi-station system can allow those tasks to progress in parallel rather than sequentially.
For buyers searching for a steam cleaner for vehicle preparation, this workflow can be more valuable than simply choosing the machine with the largest pressure figure.
The SCW-02 provides adjustable 7.5–15 bar steam pressure and a 120–170°C working-temperature range.
Those figures matter, but professional buyers should also consider steam-generation rate, recovery under simultaneous use, warm-up time, hose arrangement and expected hours of operation.
JBS currently specifies an approximate 20-minute warm-up time and three-gun configuration. Where steam output in kg/h or g/min is required for procurement, it should be confirmed with JBS rather than estimated.
A professional steam cleaner for car detailing is particularly useful around vents, door shuts, trim joints, seat rails, wheels and other confined areas.
Vehicles carrying substantial mud or grit may still benefit from pressure-washer pre-cleaning. Heavily contaminated fabrics may require extraction after the dirt has been loosened.
A professional site can therefore combine steam, pressure washing, vacuuming and extraction rather than forcing one machine to perform every stage.
The SCW-02 requires 380 V / 50 Hz three-phase power and carries a 20+3 L tank.
That makes it more appropriate to a planned commercial bay than to occasional mobile valeting. Electrical supply, cable protection, operator positions and hose routing should be planned before installation.
Review the SCW-02 product specification, compare the JBS Steam Car Wash Machine range and assess your workflow through the Auto Detailing Centers application page. For process selection, use the professional steam-cleaning resources. Submit technician count, daily vehicle throughput and site power through the JBS commercial quotation form.
| Model | SCW-02 |
|---|---|
| Steam Pressure | 7.5 – 15 Bar |
| Steam Temperature | 120 – 170 °C |
| Warm-Up Time | 20 Minutes |
| Tank Capacity | 20+3 Litres |
| Voltage | 380V – 50Hz |
| Number of Guns | 3 |
| Dimensions | 55 x 50 x 106 cm |
| Weight | 85 Kg |
Applications
Commercial car wash businesses need pressure washers, foam systems and supporting equipment sized for daily vehicle throughput, ensuring fast, consistent, efficient and reliable cleaning operations.
Car dealerships and service centres use pressure washers, foam systems and professional cleaning equipment to prepare vehicles quickly, consistently and efficiently for customers, display and delivery.
Vehicle detailing centres use pressure washers, foam systems and professional equipment to deliver controlled, consistent, efficient and high-quality cleaning across paintwork, wheels, interiors and exterior surfaces.
Recommended Use
This product is suitable for car wash businesses, service centers, fleet cleaning teams and companies seeking efficient professional cleaning equipment.
Customer Experience
We have been using the SCW-02 Steam Car Wash Machine for several months, and it has significantly reduced our water consumption and operating costs. The steam removes dirt quickly and leaves vehicles spotless. Excellent car wash machine for any business.
Product FAQ
The SCW-02 features a three-gun operating system. Depending on the installation and workflow, it allows multiple operators to clean from the same machine.
The SCW-02 has an approximate heating time of 20 minutes. This may vary depending on the inlet water temperature, ambient conditions, and electrical infrastructure.
Yes. It can be used to clean bodywork, wheels, door jambs, and hard-to-reach exterior details. A low-intensity test should be performed first on sensitive paintwork, vinyl wraps, and coated surfaces.
Yes. It can be used with controlled steam on seats, upholstery, door jambs, floor-mat areas, luggage compartments, and air vents. Intense steam should not be applied directly to electronic displays, sensors, or exposed electrical connections.
Yes. It can be used to clean bodywork, wheels, door jambs, and hard-to-reach exterior details. A low-intensity test should be performed first on sensitive paintwork, vinyl wraps, and coated surfaces.
The SCW-02 operates on a 380 V / 50 Hz three-phase electrical supply. The power line, cable size, fuse capacity, grounding, and residual-current protection should be checked by a qualified electrician before installation.
Steam Car Wash Machines
Model: SCW-01
JBS SCW-01 is a commercial steam car wash machine built for multi-operator vehicle-care sites. It combines adjustable 7.5–15 bar steam pressure, 120–170°C temperature, a 30+3 L tank, 380 V / 50 Hz three-phase power and four steam guns, supporting parallel interior detailing, wheel, door-jamb and suitable exterior cleaning tasks throughout the working day daily.
Steam Car Wash Machines
Model: SCW-03
JBS SCW-03 is a professional steam cleaner for car detailing with 8 bar steam pressure, 110–140°C temperature, a 15 L tank, 220 V / 50 Hz single-phase power and two steam guns. It is designed for valeting, workshops, vehicle preparation and smaller commercial sites that need flexible steam cleaning without a three-phase electrical installation.
Steam Car Wash Machines
Model: SCW-04
JBS SCW-04 is a compact professional steam cleaner for car detailing with 7.5 bar pressure, 110–140°C steam, a 10 L tank, 220 V / 50 Hz power and single-gun operation. It is designed for solo detailers, dealerships, workshops and mobile vehicle-care businesses that need precise interior and exterior steam cleaning without a multi-operator system.
Steam Car Wash Machines
Model: SCW-05
JBS SCW-05 delivers 15 bar steam pressure, 170–210°C operating temperature, a 33 L tank, 380 V three-phase power and dual-gun operation for demanding professional cleaning. Designed for grease, machinery, workshop equipment and heavily soiled vehicle surfaces, it enables two operators to work simultaneously and helps increase daily cleaning capacity in high-use commercial cleaning facilities.
